Roller shutter doors can provide very good security to small shops or office. Burglars cannot easily break in through such barriers. Therefore, if there is any problem found in the roller shutter then it must be immediately repaired.
Following are the most common faults with such doors for which you may need to call any professional for roller shutter repair.
- Motor malfunctioning
This is one of the very common problem due to which the shutter does not move at all or sometime stop its movement after moving a little. Technicians can check such problem and set it right.
- Track obstruction due to dirt
Movement of shutter often gets blocked due to dirt that gets settled in the track. Sometime due to poor installation work too, few metal strands remain present in the track, which can also block the smooth movement of the shutter. The track need to be cleaned properly or if the guide is worn out or corroded then it needs to be replaced.
- Door only opens partly
If the proximity sensors are damaged or got disturbed due to any reason then such problem can occur.
- Shutter door buckles
If the quality of material can get damaged due to various weather conditions and dented panels need to be replaced with new one.
Sometime shutter may refuse to work if the power source is disconnected or the motor must be getting overheated. In such case check the power source or allow the motor to cool down. Also, if use wrong code, the shutter will not open.
Source: shutterepairs.co.uk |
Comments
There are no comments yet!